KBE3.0 electric crane
KBE3.0 PRODUCT INTRODUCTION
KBE3.0 is electric wheeled crane, move fast and flexiable, no noise and no polution, is widely used in indoor electrical equipment maintenance and installation of substation, mechanical and chemical workshop equipment maintenance and installation and other narrow space occasions.
Product Parameters—KB E3.0
| Specification | 2800kg*2m | |
| Maximum Working Radius | 8m | |
| Maximum Ground Lifting Height | 9.1m | |
| Winch Device | Hook Speed | 0>6.5m/min（ 4 fall） |
| Diameter and length of wire rope | 4>7.7mm 45m | |
| Telescopic System | Boom T ype | Full automatic 5 section |
| Boom Length | 8.92 m | |
| Up and Downs | Boom Angle | 0° -60° |
| Slew System | Slew Angle | 180° continuous/1.0rpm |
| Outrigger | Outrigger Form | Frog-type outrigger |
| Maximum Extended Dimensions | 4150mm | |
| Traction system | Walking Way | Wheel type |
| Walking Speed | 0- 15km/ h | |
| Grade Ability | 10° | |
| Battery | Capacity | 500Ah/5h |
| Voltage | 80V | |
| Length x Wdthx Height | 2860mm）350mmxa30mm | |
| Weight | 5400Kg | |
| Safety Devices | Height limiter, Alarm Device, Emergency Stop Button^ Outrigger sensor | |
| Optional | remote control, Moment limiter | |
Total rated load outriggers at maximum positions
| 2.56/4.18m boom | 5.8m boom | 7.34m boom | 8.92m boom | ||||
| Working radius（m） | Rated load（T） | Working radius（m） | Rated load（T） | Working radius（m） | Rated load（T） | Working radius（m） | Rated load（T） |
| 2.00 | 2.8 | 3.00 | 1.2 | 4.00 | 0.85 | 4.50 | 0.7 |
| 2.50 | 2.1 | 3.50 | 1.1 | 4.50 | 0.75 | 5.00 | 0.7 |
| 3.00 | 1.5 | 4.00 | 1.0 | 5.00 | 0.6 | 5.50 | 0.6 |
| 3.50 | 1.2 | 4.50 | 0.9 | 5.50 | 0.5 | 6.00 | 0.5 |
| 5.00 | 0.75 | 6.00 | 0.42 | 6.50 | 0.45 | ||
| 5.20 | 0.7 | 6.50 | 0.42 | 7.00 | 0.4 | ||
| 6.75 | 0.33 | 7.50 | 0.3 | ||||
| 8.00 | 0.2 | ||||||
Dimensions
